2022 Anderson Group Co. AST Series Double Screw A700ST

Information

2022 Anderson Group Co. AST Series Double Screw A700ST

The pull type twin auger A700 mixer (side trap discharge) is designed for intensive daily use. These mixers are adaptable depending on the configuration of the operation and the type of farming. The solution for every size farm.

Photos

Highlights

  • St. Paul, Alberta
  • 2022
  • Anderson Group Co.
  • AST Series Double Screw A700ST
  • Available
  • without extension: 110 in (2.79 m)

Specifications

  • 2022
  • Anderson Group Co.
  • AST Series Double Screw
  • A700ST
  • Wagon
  • 1000 RPM | Low Speed: 100 hp | High Speed: 150 hp
  • Shaft: 1" 3/8 Z21 | 1000 RPM 1"3/4 Z20 54 in (888cm) 0 RPM 1" 3/8 Z6
  • Standard planetary model and ratio configuration: 2003 @25.89
  • 275/70R22.5 (DOUBLE)
  • Auger RPM – Low Speed: 27 RPM | Auger RPM – Standard High speed: 41 RPM | 2 Speed Gear Box and ratio: C3A-R, 1;1,5 54 in (888cm) 0 RPM C3A-R, 1,8;2,7 1000 RPM
  • Required: Min - 10-15 US gal / 37-56 L/m in.
  • Required: 160-200 bar (2300-2900 psi)
  • Flighting Thickness (grade AR235): 5/8 in
  • Thickness (grade AR235): 1/4 in
  • Driveline security: Shear bolt
  • 6" capacity extension: 116 in (2.95 m) | 12" capacity extension: 121 in (3.07 m) | 18" capacity extension: 128 in (3.25 m) | Hay retention ring (additional height): 0 in / 3.5 in | Without incline conveyor: 101 in (2.57 m) | With incline conveyor: 117 in (2.97 m) | Incline conveyor chain / belt 3 ft at min.26 angle /max 40: 30-23in at 26º / 27-20in at 40º | Incline conveyor chain / belt 4 ft at min. 26 angle /max 40: 46-50in at 26º / 59-59in at 40º | Incline conveyor chain / belt 5 ft at min. 26 angle /max 40: 53-57in at 26º / 69-69in at 40º | Incline conveyor chain / belt 6 ft at min. 26 angle /max 40: 57-61in at 26º / 76-76in at 40º | Incline conveyor chain / belt 7 ft at min. 26 angle /max 40: 63-67in at 26º / 86-86in at 40º | Incline conveyor chain / belt 8 ft at min. 26 angle /max 40: 67-71in at 26º / 92-92in at 40º | Incline conveyor chain / belt 3 ft at min. 26 angle /max 40: 43-47in at 26º / 53-53in at 40º | Floor ST (E1) / Conveyor FD (E2) to ground: 44 in (1.12 m) | Floor thickness (grade AR235): 3/4 in | Incline conveyor operating angle: 26 @39
  • without extension: 110 in (2.79 m)
  • 288 in (7.32 m)
  • of the wheels: 100 in (2.54in(888cm) m)
  • Utility: 20 300 lb (9206 kg)
  • without extension: 700 ft3 (19.8 m3) | 6" capacity extension: 770 ft3 (21.8 m3) | 12" capacity extension: 840 ft3 (23.8 m3) | 18" capacity extension: 910 in (25.8m3) ft3 (19.3 m3)
  • Machine (empty) - STD configuration: 15 987 lb (7250 kg)
  • Number of load cells: 4 | Scale system: DG500 | Axle: Single | Number of Auger: 2
  • per auger: 6