2022 GrainMaxx Augers 8000 Series 16"X105'

Information

2022 GrainMaxx Augers 8000 Series 16"X105'

The GMX16 is a 16” auger with a commercial strength steel A-frame undercarriage that will withstand bowing and help to maintain proper tube alignment. This model also features reinforced flighting on critical grain transfer points, helping to maintain the life of the flighting.

Features may include:

Adjustable Axles

All GrainMaxx Swing Away Augers are equipped with adjustable axles. Jack up each wheel with the auger’s hand jack and slide the axles from the transport width of 12'4", out to 13’8" (outside of tire) for increased operating stability.

Telescopic Drive System

The 7000 and 8000 Series features internal drive allow both left and right swing.

Easy Access Service Doors

You will find large access service doors at the hopper pivot, the swing auger universal joints, the top of the swing tube and on both sides of the boot to ensure ease of maintaining universal joints, chain couplers and thorough cleaning. The hopper rotates in transport position for ease of cleaning and to keep rain and snow from accumulating in the bottom.

Easily Raise & Lower Swing Auger

The 5000, 6000, 7000 and 8000 Series come standard with a hydraulic winch to raise and lower the swing hopper to and from transport position. No more back-breaking hand cranking!

Telescopic Reach & Retract

The 6000, 7000 and 8000 Series telescopic swing away features an innovative system that allows you to retract the swing hopper out of the way to spot the grain trailer and then hydraulically reach it under the trailer to unload. The swing auger is positioned with easy access hydraulic controls to move the hopper side to side with large Posi-Drive mover wheels, as well as to reach and retract the swing auger into place.

Photos

Highlights

  • St. Paul, Alberta
  • 2022
  • GrainMaxx Augers
  • 8000 Series 16"X105'
  • Available
  • Low Profile Hopper: 48" (121.9 cm)
  • Low Profile Hopper: 11" (27.9 cm)

Specifications

  • 2022
  • GrainMaxx Augers
  • 8000 Series
  • 16"X105'
  • General
  • Hp Required (With Dry Wheat): 200 HP (149.1 kW)
  • Speed Reducer Gearbox: Enclosed, Cast Casing, 1000 RPM Reducing Gearbox (540 RPM) with Reversing Capability
  • Shaft: 55E Double CV with 2-Bolt Shear
  • 22.5" (57.2cm) Agricultural Tires
  • 22.5" (57.2cm) Agricultural Tires
  • Tread: 148" - 182" (4511 - 5547.4cm)
  • Psi Required To Raise Auger: 1700 PSI (117.2 bar)
  • Tube Connectors: ¼" (0.6cm) Angle Flange | Main Flighting: 15" (38.1cm) x ¼" (0.6cm) Stretched & Welded | Flighting Shaft: 3.5" (8.9cm) x 11 GA Tubing; Square Flight Connector | Reinforced Flighting/Edge: ¼" (0.6cm) Main Flighting with reinforced flighting on Critical Grain Transfer Points (Boot Flight: ¼" (0.6cm) plus 10 GA reinforced edge = 5/16" (0.8cm) | Upper Bearing: 2" (5.1cm) Pillow Block Greaseable Ball Bearings | Tube Trussing: 3.5" (8.9cm) x 11 GA Tubing; ½" (1.3cm) Cable Stays | Hydraulic Lift: 2 x 6.5" (16.5cm) Bore Cylinders; ½" (1.3cm) Aircraft Cable | Undercarriage: 4" (10.2cm) x 8" (20.3cm) HSS Tubing | Axle: 4" (10.2cm) x 4" (10.2cm) x 3/16" (0.5cm) Tubing; 4" (10.2cm) x 4" (10.2cm) x ¼" (0.6cm) on Extensions
  • Low Profile Hopper: 11" (27.9 cm)
  • Low Profile Hopper: 68" (172.7 cm)
  • Low Profile Hopper: 48" (121.9 cm)
  • Tube: 10 GA
  • (18" HITCH): 13' 8" (4.2m)
  • Parking Jack: 12,000 lbs. (5445.1kg)
  • 8-Bolt Agricultural Type